ENGINEERING SPECIFICATIONS:  StarTOC AUTOMATIC BENCHTOP TOC
Model/Name		StarTOC Automatic Benchtop Analyzer					Notes
Analysis Methods		All methods in single Analyzer:  UV/Heated Persulfate, High Temperature Combustion, Ozone Promoted/Hydroxyl Radical, Heated Persulfate, Ultra-Pure (UV - NDIR)					Operator selectable - No Hardware Change
Analytes Measured		Total Organic Carbon; Total Carbon; Total Inorganic Carbon; Non-Purgeable Organic Carbon; TOC-True (including purgeable Organics)
Detector Type (CO2)		NDIR (solid state; no moving parts; computer-controlled; non-reflective sample cell-impervious to corrosion and guaranteed for 5 years)					Footnote 1 - NDIR vs Conductivity
Control/Data Handling		Microsoft Windows PC
Sample Introduction		Digital Injection/Auto-Sampler
Measurement Range (mg/L)		0.100 - 50,000					Dependent on Chosen Method
							No Operator Dilution
Accuracy/Repeatability (%)		£5% RSD or 2% FS (whichever is greater)
Carrier Gas Flow (mL/min.)		300 mL/max - Computer Controlled Mass Flow					Bottled gas preferred for low
		Controller CO2 & HC - FREE AIR, OR O2					ppm/ppb measurements
		15 +/- 2 PSI
Average Analysis Time (minutes)		3
Outputs		RS-232
Display		Flat Color Screen (external PC)
Data Storage		External PC
UTILITIES Required
Power:		100/200 VAC
		50/60 HZ.
		15 Amp Service
Carrier Gas		CO2 & HC - free air, or O2 (300 mL/minute-max.);
		15 +/- 2 PSI
Reagents		Prepackaged Sodium Persulfate
		Phosphoric Acid
		Calibration Standards
		D.I. Water
Sample Drain		gravity/air break
Environment		Operating Temperature: 10° - 50°C
		50°  - 122°F
Construction
Enclosure		Epoxy Powder Coated cold rolled Steel
Dimensions (HXWXD)		51 X 51 X 38 (cm)
		25 x 22 x 24 (in)
Mounting		Benchtop
Weight		59 Kg
		131 Lbs
Compliance/Certification		CE, CSA, ASTM, EPA Methods
Conformity		Complying with all International Standards, such as:
		DIN-EN 1484, DIN-ENV 12260, DIN 38409-H3,
		ISO 8245, Standard Method 5310B, Standard Method
		5310C, Standard Method 5310D, USEPA 415,
		USEPA 9060, ASTM D5173, EN 13137
General Features		Auto-Calibration,
		Auto-Validation,
		Auto-Cleaning,
		Historical Data/Time and Date Stamped
Options
		Total Nitrogen
		Oxygen Generator (electricity only)					Eliminates Gas Bottles for up
							to 5 analyzers.  Plant Air Not
							Required.  (For indoor/climate
							controlled environments only)
		Printer
(All performance specifications have been verified in a controlled laboratory environment.  Actual field performance may vary with application. Measuring range and detection limits depend on the method, injection volume, vessel purity, chemicals and gases used, and the qualification of the operators.
Footnote 1
Conductivity vs. NDIR Interferences Chart
Reliability of TOC Results in ULTRAPURE WATER ANALYSIS