ENGINEERING SPECIFICATIONS:  StarTOC ON-LINE COMBUSTION TOC
Model/Name		StarTOC ON-LINE Combustion Analyzer					Notes
Analysis Method		Combustion/Non-Dispersive Infrared (NDIR) CO2 Detection
Analytes Measured		Total Organic Carbon; Total Carbon; Total Inorganic Carbon; Non-Purgeable Organic Carbon; TOC-True (including purgeable Organics)
Detector Type (CO2)		NDIR (solid state; no moving parts; computer-controlled; non-reflective sample cell-impervious to corrosion and guaranteed for 5 years)					Footnote 1 - NDIR vs Conductivity
Control/Data Handling		Industrial Microsoft Windows CE Computer, Touch Screen, Paperless Chart Recorder
Sample Introduction		Digital Injection
Sample Handling		Up to 400 Microns Suspended Solids
Measurement Specifications
Measurement Range (mg/L)		0-25,000 configurable
Accuracy/Repeatability (%)		3
Carrier Gas Flow (mL/min.)		300 mL/max - Computer Controlled Mass Flow
		Controller CO2 & HC - FREE AIR, OR O2
		15 +/- 2 PSI
Average Analysis/Response Time (minutes) Including TIC		5-9 (application dependent)
Outputs		RS-232
		RS-485
		4-20 mA (2 ea.)
		Alarm Relays (3)
		2 Level Alarms
		1 Malfunction Alarm
		Loss of Carrier
		Out of Service Signal (when unit in calibration or validation check)
Display		Flat Panel Color Paperless Chart Recorder
Data Storage		Internal Memory
Sample Requirements
Temperature Range		4° - 90°C					Star offers cooler for higher
		40° - 194° F					temperatures
sample flow rate		20 mL/min					Fast by-pass loop suggested
Inlet pressure		0-5 psi
sample Drain		gravity/air break
UTILITIES Required
Power:		100/200 VAC
		50/60 HZ.
		15 Amp Service
Carrier Gas		CO2 & HC - free air, O2 or N2 (300 mL/minute-max.);
		15 +/- 2 PSI
Reagents		Hydrochloric Acid
		Phosphoric Acid
		Calibration Standards
		D.I. Water
Environment		Operating Temperature: 10° - 50°C
		50° - 122°F
Construction
Enclosure		Two (2) Attached Cabinets
		Epoxy Powder Coated cold rolled Steel
		Stainless Steel (option)
Dimensions (HXWXD)		119 X 51 X 38 (cm)
		47 X 20 X 15 (in)
Mounting		Rack or Wall Mount					cf. Installation drawing
Weight		68 Kg
		150 Lbs
Area Classification Option		NEMA - 4, IP 65 Enclosure
Compliance/Certification		CE, CSA, ASTM, EPA Methods
Conformity		Complying with all International Standards, such as:
		DIN-EN 1484, DIN-ENV 12260, DIN 38409-H3,
		ISO 8245, Standard Method 5310B, Standard Method
		5310C, Standard Method 5310D, USEPA 415,
		USEPA 9060, ASTM D5173, EN 13137
General Features		Auto-Calibration,
		Auto-Validation,
		Auto-Cleaning,
		Historical Data/Time and Date Stamped
Options
		Multi-Stream Analysis					User to specify number of
							streams
		Oxygen Generator (electricity only)					Eliminates Gas Bottles for up to 5 analyzers.  Plant Air Not Required. (For indoor/climate controlled environments only)
		Star also offers custom options.
(All performance specifications have been verified in a controlled laboratory environment.  Actual field performance may vary with
application measuring range and detection limits depend on the method, injection volume, vessel purity, chemicals and gases
used, and the qualification of the operators.)
Footnote 1
Conductivity vs. NDIR Interferences Chart
Reliability of TOC Results in ULTRAPURE WATER ANALYSIS